Pool plaster does an excellent job of creating a watertight seal for an in-ground swimming pool. Choosing the right plaster finish for your pool can make all the difference in terms of durability, functionality, and maintenance. A good plaster coat may last for as long as 20 years before re-plastering is required because it is a durable surface that can stand up to the harsh environment of pool water chemicals.

Pool Resurfacing Importance

However, even with a properly maintained water balance and maintenance, pool plaster is susceptible to wear and tear, which can cause damage to the shell and leave it looking quite uninviting. Pool resurfacing done by a professional, in this case, is important because swimming pools are far more complex, involving a lot of components that can potentially fail and result in expensive repairs

How well can you tell if your pool’s drop in water level is from normal evaporation or a leak? The reality is that some concrete pools will leak because, while they are highly water resistant, but being a porous substance makes them inclined to leaks. This is why any pools component that is worn out, broken, or failing should be attended to immediately upon detection.

Reasons For Damage

In order to maintain the integrity and esthetics of the most visible part of a pool a professionally done smooth plaster coating will prevent water from leaking through into the gunite and potentially damaging other components of the pool’s structure. Damages such as stains, streaks, erosion, pitting, mottling, discoloration, hairline cracks, and especially pool water chemistry are often the most common causes of pool plaster damage.

There are many benefits that come with having a pool plastering or pool resurfacing job done, and the type of pool plaster finish, how much pool maintenance you are willing to put up with, durability and cost should factor in your decision making. The current condition of your pool and the type of material you decide to use is the biggest factor, it all, however, comes down to the prep work.

Steps For Resurfacing

The following are some important steps when resurfacing a plastered pool which essentially involves the removal of your old pool interior and resurfacing it with a new coating.

• Drain the pool then chip away the old plaster to expose the granite followed by thorough cleaning the pool.

PS: All cracks should be filled evenly to ensure that there aren’t any uneven places on the surface when you later apply the plaster.

• Wash the pool with a wire brush, then with trisodium phosphate (TSP) followed by a coating with muriatic acid to remove all mineral deposits. The surface can also be sandblasted in order to make it rough, then a bond coat applied.
• The next step is to resurface it by spreading plaster, which can either be plaster, pebble, quartz, or fiberglass using a plaster swimming pool resurfacing system.
• When a pool resurfacing job is done professionally, you can expect to enjoy your swimming pool for years to come.

Learn more about Pound Pool Plastering and their numerous pool plastering options including: pool resurfacing, plaster surfacing, commercial pool plaster, residential pool plaster, plastering swimming pools, tiling swimming pools, coping swimming pools, and more at www.pound-pool-plastering.com.  To contact our pool plastering specialists call 248.476.4544 today.

When hiring pool plaster companies, you’ve likely heard mentions of the different materials. Something that companies can forget is that you have no idea what the different materials do or the downsides to using particular ones. You’re left looking for the information about the different options.

The next time you need pool plastering, go in armed with information. These are the different materials you need to know about.

White Cement/Marble Mixture

White plaster is one of the most common options, because it gives a clean and bright finish. Many companies will now use a mixture of white cement and marble to create their classic white finish. It’s economical for all, as it is one of the strongest against the pool or spa water. The plaster is reliable and one of the cheapest to lay in the first place.

However, if the pool isn’t maintained properly, the plaster will start to look worn and old. Scaling can start to appear or there may be some shading in certain areas. In more extreme cases, the plaster can start to crack due to the fluctuating chemicals within the water. It is possible to determine the cause, helping you to limit the problems. However, pool plastering will likely need to take place again.

Pozzalans Added to Strengthen Plaster

Pool plaster companies have started adding pozzalans to their plaster (both white and colored plaster). The pozzalans are chemicals added to create stronger plaster that isn’t affected as much by chemical changes within the water. One of the chemicals is silicone-based, which helps to repel the water to protect from attacks.

Using a pozzalan-added plaster is still cost effective. However, the use of the plaster doesn’t solve all long-term problems. A good pool maintenance schedule is still required to keep the finish looking like new.

Colored Ceramic Quartz

Colored plaster is popular for those wanting to match a decor within a pool or to add a brighter look to the water. For example, a grey-colored plaster can help to add more of a blue tint to the pool water. Color ceramic quartz is one of the most popular pool plastering options. Ceramic-coated sand is added to plaster products.

One of the biggest benefits is the decor. All types of colors are available, whether you want a deep red, bright blue, or sea green to finish your underwater look. The ceramic can also add more durability to the plaster. The downside is the cost. The ceramic is usually more expensive, but that cost may be justified with the extra durability.

Pebble Surface Plaster

A fourth option is a pebble surface plaster, which is exactly as it sounds. The plaster is embedded with smooth river pebbles to create a more nature-based look. The pebbles actually help to add more durability to the plaster, so it’s not as likely to be affected by chemical fluctuations in the water.

The biggest downside is the extra cost. However, it will take extreme chemical conditions to damage the surface of the pebbles, making it one of the most cost-effective options.

Talk to pool plaster companies about your plaster material options. Discuss what you would like to achieve with the look and finish, along with the type of chemicals you use in the water. Not only will you get the best pool plastering options, but you will learn the best ways to look after your pool.

Learn more about Pound Pool Plastering and their numerous pool plastering options including: pool resurfacing, plaster surfacing, commercial pool plaster, residential pool plaster, plastering swimming pools, tiling swimming pools, coping swimming pools, and more at www.pound-pool-plastering.com.  To contact our pool plastering specialists call 248.476.4544 today.